Pack of 3 cleaners

What this pack of 3 cleaners is

This pack includes 3 units of the internal enzymatic cleaner for outdoor spas and whirlpool baths. Its formula helps loosen biofilm, grease and other organic matter residues that adhere inside the pipework, supporting better system performance. It is suitable for use at temperatures between 20 and 40 °C and features a non-corrosive formula.

Pack contents

• 3 units of the internal enzymatic cleaner.
• A format designed to give you multiple maintenance applications.

Main advantages

• Helps keep the inside of the pipework cleaner.
• Supports the removal of organic build-up in the circuit.
• Ideal for recurring and scheduled maintenance.
• Professional-quality solution for spas and whirlpool baths.

Summary directions for use

Outdoor spas: check the sanitiser level before treatment, dose the product into the water, allow it to recirculate for around 4 hours, drain the spa, clean the shell and refill with fresh water while adjusting pH and sanitiser.

Whirlpool baths: fill with hot water above jet level, dose the product, run the pumps for 10 to 15 minutes, allow the system to recirculate for around 4 hours, then drain and clean the bath.

Summary dosage

• Outdoor spas: 300 mL/m³.
• Whirlpool baths: 600 mL/m³.

Frequency of use

Suggested use in outdoor spas: every 3 months. In whirlpool baths: every 1 to 3 months, depending on how often the bath is used.

Information note: this text complements, but does not replace, the mandatory information on the product label and the current safety data sheet.